Colorado Norton Works

28438 Road P
Dolores, CO 81323
Phone (970) 882-7163
Fax (970) 882-7163
Hours M-F, 8-5 Rocky Mountain Time

U.S. Shipping Rates

$1 - $50: $11
$51- $100: $13
$101 - $150: $18
$151 - $200: $23
$201 - $300: $26
Over $300: $30

All freight costs include insurance.

Please Contact Us for Shipping quotes outside the U.S.

"I saw your bikes in a classic bike magazine here in the UK and I have to pass on my appreciation of what you do. The lowered yellow Commando with the Corbin seat has to be the most gorgeous bike I have ever seen and remains number one on my fantasy wish list."

- Paul Howard

Motorcycle Frame & Body

The motorcycle frame and body are what hold your Norton Commando motorcycle together. Then isn't it important to keep them in the best shape possible to give your bike the smoothest ride and the coolest look? Colorado Norton Works, a motorcycle builder offers the latest, highest quality pieces for your motorcycle body, designed by both our in-house customizers and other motorcycle part manufacturers, including custom motorcycle fenders, motorcycle billet specialties and instruments spacers.

MKIII Isolastics Conversion

	Manufacturer: CNW Description: This kit will replace the Isolastics in any year bike with the adjustable style that was used in the MKIII Commando. The Vernier style adjusters make adjustments very easy compared to very difficult and time consuming on earlier models. With the MKIII style adjusters you can get both front and rear done in a matter of minutes. The internal rubbers are also of a better design than what was used previously. In typical CNW fashion we weren't pleased with the look and finish of the standard MKIII adjusters, abutments and cups so we are using stainless steel pieces to replace all these. They are of course show polished and we don't use a rubber boot to cover them up as this not only traps moisture and dirt but also hides these very 'trick' looking parts. The kit we offer is complete and ready to install. It's very easily done on your engine parts if they are not on your bike, and will require a fair amount of work to put in place if your bike is assembled. The kit includes a machined and powder coated front engine mount yet you will receive a credit when / if you return your old mount. If you don't want your front mount powder coated Gloss Black, contact us and we can discuss your options. - Both front and rear new internal rubbers - Front and rear new PTFE friction washers - Complete stainless Isolastics kit with Adjusters, Abutments and Cups - All stainless parts are show polished - Machined, powder coated (Gloss Black) and prepped front engine mount - The front mount is assembled and ready to install. The rear will require installation in your engine cradle. This is a simple procedure as long as the rear iso tube is easily accessed. - 60.00 credit when / if you return your old front engine mount that is not damaged.
	#126 MKIII Isolastics Conversion for all years Our Price: $559.00
	Also available are some mounting parts for your Isolastics and Engine mounts. All in polished stainless.
	#127 Rear Iso stud in stainless steel with polished ends Our Price: $29.95
	#128 Front Iso bolt in stainless with washers and nut, all polished Our Price: $36.95
	# 118 Engine mounting hardware
	#123 Z-plate hardware

Dual Electronic Instruments kit # 131 and # 132

	Manufacturer: CNW Description: Change your instrumentation to a state of the art analog, electronic set-up that will not only take care of all the issues that plague the original mechanical gauges and drives, but will also take you to the highest level of quality, finish and performance. The CNW dual gauge kit uses Autometer gauges, the leader in electronic motorcycle gauges, to ensure that the information you are getting is accurate and consistent. The gauges are water resistant to handle the harsh environment they are operating in. The CNW billet aluminum gauge bracket is CNC machined to the highest level of quality and finish. We designed it to be located at the same upper plane that the original gauges are located at. The gauges are rubber suspended in the bracket itself. This allows for a very clean mount and also isolates the gauge from some of the vibration. CNW also designed two different speed sensor pick-ups to work with both the rear drum brake Commandos as well as the MKIII disc model. These CNC machined stainless pieces are made to make for a simple yet extremely clean installation. The quality of this electronic instruments package is what you have come to expect from CNW. The kit is designed to run with a Negative ground system only. - CNC machined billet aluminum gauge mount for strength, weight savings and beautiful finish. - The gauge mount uses a unique mounting system that allows for a very clean mount that also isolates the gauge from vibration. - The Gauge mount is designed to be used with the standard top fork nut and washer for a very straight forward installation. - The gauges 3 3/8 wide and are very close overall dimensionally to the original instruments. - Simple hook up for both the Speedo and Tach. - MK III kit includes a speed sensor mount, made in stainless steel, that replaces an existing spacer at the rear wheel and the speed sensor is getting its pulses from the disc mounting hardware. - The rear drum brake kit includes a replacement bearing retainer, special spacer and speed sensor mount, all made in stainless steel, for an extremely clean installation and to replace what was there to originally drive the speedo. - Built in instrument light - Available with a Black or White dial - Gauge holders are available in a Brushed or Polished finish - The kit includes a polished billet Tach blanking plate, CNW # 111 - The kit will replace: Speedo, tach, instrument lights, instrument buckets, speedo cable, tach cable, tach drive, speedo drive all of which are questionable at best as far as performance, reliability, longevity and build quality. Not to mention the leaks associated with these parts at the tach drive and speedo drive units.
	All 131 part numbers are for a rear drum application #131–B Black dials with brushed gauge holders Our Price: $995.00
	#131–BP Black dials with polished gauge holders Our Price: $995.00
	#131–W White dials with brushed gauge holders Our Price: $995.00
	#131–WP White dials with polished gauge holders Our Price: $995.00
	All 132 part numbers are for a MKIII, rear disc application #132–B Black dials with brushed gauge holders Our Price: $995.00
	#132–BP Black dials with polished gauge holders Our Price: $995.00
	#132–W White dials with brushed gauge holders Our Price: $995.00
	#132–WP White dials with polished gauge holders Our Price: $995.00

Solo Electronic Tachometer kit #130

	Manufacturer: CNW Description: We wanted to offer an all performance, all business look than only a single center mounted gauge can give you. CNW's solo handlebar mount takes advantage of all the benefits of using an electronic instrument while giving you a heads up display of what the engine below you is winding up to. The gauge is made by Autometer, the leader in electronic instrumentation for motorcycles. The gauge is extremely reliable, accurate and designed to operate in the harsh environment of a motorcycle application. The CNW billet aluminum gauge holder is designed to hold the gauge securely yet carefully with a unique internal rubber mount. The gauge bracket is very easily mounted on any 7/8 handlebars and will rotate to any desired position. The simple 3 wire hook up allows for a very clean and straight forward installation. When the ignition is turned on the instrument automatically lights up. The kit is designed to run with a Negative ground system only. - Unique 1 piece gauge holder for a clean and strong mount - Billet aluminum for strength and weight savings - Gauge holder allows you to rotate the gauge to desired position for perfect viewing - 3 3/8 Autometer electronic gauge - Simple three wire hook up - Built in instrument light - Available with a Black or White dial - Gauge holder available in a Brushed or Polished finish. - Kit includes a Polished Billet Tach blanking plate CNW # 111
	#130–W White Dial with Brushed Gauge holder Our Price: $495.00
	#130–WP White Dial with Polished Gauge holder Our Price: $495.00
	#130–B Black Dial with Brushed Gauge holder Our Price: $495.00
	#130–BP Black Dial with Polished Gauge holder Our Price: $495.00

Solo Electronic Speedometer kit # 134 and #135

	Manufacturer: CNW Description: If accurate speed and an odometer is important to you, yet you want to stay with the performance look of a solo center mounted instrument then this is it. CNW's solo handlebar mount is not only available in a Tach set-up (#130) but also with the Autometer speedo. The unique one piece billet gauge holder will allow you to angle the speedo any way you want it to get the best view of the instrument. The gauge holder is also designed in such a ways that it holds the gauge securely yet carefully with an internal rubber mount. It can fit any 7/8's handlebars. The Autometer gauge is designed for motorcycle applications and built to operate in the environment of a motorcycle application. The analog speedometer also has a digital odometer and trip meter. The instrument is always lit when ignition is on. The kit comes with CNW's extremely clean speed sensor mounts that will replace the original speedo drive and related parts. The speed sensor parts are all CNC machined in stainless steel and then show polished for an unmatched quality look. The hook up requires the rear wheel to be removed but is very straight forward. The kit is designed to run with a Negative ground system only. - Unique 1 piece gauge holder for a clean a strong mount - Billet aluminum for strength and weight savings - Gauge holder allows you to rotate the gauge to desired position for perfect viewing. - 3 3/8 Autometer electronic gauge with built in instrument light. - All speed sensor parts are CNC machine in high grade stainless steel then show polished. - The kit is available for a rear drum or a MKIII disc application. - The instrument is available in a White or Black dial. - Gauge holder is available in a Brushed or Polished finish.
	All 134 part numbers are for a rear drum application #134&W White Dial with Brushed gauge holder Our Price: $745.00
	#134–WP White Dial with Polished gauge holder Our Price: $745.00
	#134–B Black Dial with Brushed gauge holder Our Price: $745.00
	#134–BP Black Dial with Polished gauge holder Our Price: $745.00
	All 135 part numbers are for a MKIII, rear disc application #135–W White Dial with Brushed gauge holder Our Price: $745.00
	#135–WP White Dial with Polished gauge holder Our Price: $745.00
	#135–B Black Dial with Brushed gauge holder Our Price: $745.00
	#135–BP Black Dial with Polished gauge holder Our Price: $745.00

Billet Triple Trees #304 (handlebar-style) and #305 (clip on style)

	Manufacturer: CNW Description: Replace your existing trees or use these for the ultimate look on your Commando custom bike. The trees have been CNC machined out of 6061 billet aluminum and have been finished to the highest possible standard. We designed them to enhance your Commando front end with soft, radius corners and enough material thickness to ensure that they stay extremely rigid. We also developed a clip on style set for those that want to get the aggressive look that only they can offer. - CNC milled out of 6061 billet aluminum - Aligns the fork tube with the steering stem for greater high speed stability compared to the stock design. This alignment also betters the torsional rigidity in the steering neck - Computer designed to maximize strength and minimize weight - The handlebar clamps are secured from the bottom of the top yoke for an extremely clean appearance - The lower stem nut is located in a recessed pocket so that it can not be seen from the front or sides - There are holes drilled through the top yoke and handlebar clamps to allow for internal handlebar wiring - Stainless Steel fork stops - The lower yoke pinch area is superior in design that will center the fork tube in the bore. The stock version will not do this but rather push the tube to the side of the bore - If a post mounted style headlight is being used there is a recess on the bottom yoke that just needs to be drilled through (The hole size is 3/8-inch) - The trees are available in both a 7/8-inch handlebar style and a clip on style - The trees are available in a brushed finish and a show polished finish - Either the standard sealed ball bearings with the distance piece or optional tapered roller bearings can be used to mount the trees - These triple trees weigh 30% less than the standard triple trees - The stock headlight ears can not be used with this set up (see our headlight ears #302 as a perfect match in both material and finish)
	#304 Handlebar style with a brushed finish Our Price: $698.00
	#304-P Handlebar style with a polished finish Our Price: $698.00
	#305 Clip on style with a brushed finish Our Price: $698.00
	#305-P Clip on style with a polished finish Our Price: $698.00
	You may also need: - #137 Triple Tree Install Kit - #138 Socket 1-5/16 (for lower stem nut) - #306 CNW Stainless Steel Top Fork Nuts - #307 CNW Short Stainless Steel Top Fork Nuts - #406 Tapered Roller, Steering Neck Bearings

CNW Triple Tree Installation Kit #137

	Manufacturer: CNW Included in kit: - Polished Stainless Steel upper dust cover - Polished Stainless Steel lower stem nut - 2 upper washers for correct clearance to dustcover and bearing - Lower stem washer
	#137 CNW Triple Tree Installation Kit Our Price: $49.95

CNW Stainless Steel Top Fork Nuts

	Manufacturer: CNW Replace those rough looking stock chrome fork nuts with these precision CNC machined Stainless Steel top nuts. We single point cut the threads as opposed to chase thread as most other manufacturers do. This leaves a perfectly smooth thread with no burrs or imperfections. We also cut the tops slightly concave for a more finished design. Description: - 303 Stainless Steel - CNC machine cut - Single point cut threads - Dished top surface - Show polished - Includes Stainless Steel washers
	#306 Stainless Steel Top Fork Nut Our Price: $75.00/Pair
	#307 SHORT Stainless Steel Top Fork Nut Our Price: $75.00/Pair These fork nuts are identical to the ones above except for that they are made shorter so those that prefer to run without instruments will have a Top Nut that is flush mounted rather than having to use a spacer with the original length Fork Nut. - Short length Top Nut designed to secure the fork tube without the need of a spacer. - Same features as the # 306 Fork Nuts above

Billet Z-Plates

	Manufacturer: CNW Description: - CNC milled from 6061 aluminum - Replaces stock plates without any modifications - Extremely strong - Beautiful finish
	#303 Brushed finish Our Price: $319.00
	#303–P Polished finish Our Price: $319.00

Z-Plate Mounting Hardware

	Manufacturer: CNW Description: Get ride of those crude looking bolts once and for all. Includes hardware for the main exhaust plats and the foot rest assemblies. - Stainless steel - All show polished - Button head allens
	#123-STD Our Price: $52.95
	#123-MKIII Our Price: $57.95

Instrument spacers

	Manufacturer: CNW Description: - Alloy spacers that replaces the instrument buckets - For use when running no instruments - Show polished
	#114 Our Price: $24.95/pr

Billet Headlight Ears

	Manufacturer: CNW Description: - CNC milled from 6061 aluminum - Light weight - Beautiful finish and fit - Stainless hardware - Vintage style
	#302 Brushed finish Our Price: $169.00
	#302-P Polished finish Our Price: $169.00

License Plate Bracket

	Manufacturer: CNW Description: - For use with old style tailight - Laser cut - Turn signal mounts - 14 guage steel - Heavy duty and very well made
	#101 Bare steel Our Price: $72.95
	#101 PC Powdercoated black Our Price: $89.95

Fender

	Manufacturer: CNW Description: - Solid steel U-bracket helps support fork legs - Clean look - Strength of steel - Uses no fender stays - Perfect for use with CNW/Brembo front brake system Won't fit with a 4.10 tire size
	#104 Bare metal Our Price: $119.95

CNW Chain Guard

	Manufacturer: CNW Description: - Finally back in production this highly requested chain guard is designed to flow with the rear fender and wheel. - Nice slim design for a light weight and all purpose look. - 18 gauge mild steel - Available in bare steel only at this time
	#122 Our Price: $119.95

Engines & Transmission

Chassis, Wheels & Brakes

Electrical System

Body Components & Finish

Rebuild Options

Pricing, Policies & Terms

Engine & Transmission Rebuild Services

CNW Custom Wheels

CNW Head Services

Parts Catalog

Coming Soon

CNW Necessities

What's New

Bearings

Drive

Electrical

Engine

Frame & Body

Grips & Mirrors

Brakes

Suspension

CNW Modifications

Tools

Colorado Norton Works

Events Calendar

Photo Gallery

038 Café Story

Norton Links

Desktop Wallpapers